Fluke PM8907 808

Battery Charger / Universal Power Adapter, Fluke ScopeMeter 90 / 123 Series

The Fluke PM8907/808 universal power adapter is intended for users that travel internationally. PM8907/808 permits connection to various line voltages, line frequencies and line power sockets worldwide.

To accommodate connection to various sockets the Fluke PM8907/808 is equipped with a female plug that must be connected to a line cord appropriate for local use. Since the adapter is isolated, the line cord does not need to be equipped with a terminal for connection to protective ground. Since line cords with a protective grounding terminal are more commonly available you might consider using these anyhow.

The Fluke PM8907/808 power adapter is equipped with a switch that must be set to the local line voltage�115VAC (+1 -10%) or 230VAC (+1 -10%). The power adapter automatically adjusts to 50, 60 or 400Hz (+1 -10%). Output is 15V, 300mA at 7W via a 5mm panel jack (DIN 45232) with outer contact positive.

Warning. To avoid electrical shock or fire:
Only use line cords that comply with the local safety regulations. These regulations can differ depending on the country and the working environment.
Before use check that the selected range matches the local line power voltage and frequency.
Read and comply with the additional safety instructions that you find in the instruction manual supplied with your Fluke ScopeMeter.